You can remove the cable from the dist and spin it with your fingers or a drill to see if it works.
It is common for the cable to twist the end off, especially if the cable gets in a bind where it comes out of the dist.
Check the cable ends first by spinning it with the drill(or fingers), then, if the tach moves like that, the gear is probably damaged in the dist.
______________
Joel Adams
C3VR Lifetime Member #56 
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"