Hi all,

This is pretty much going to be the same question I asked concerning replacing the power steering hoses from the power steering pump to the control valve.
     Since I’m going to replace those hoses I was considering replacing the two hoses to the power steering control valve / cylinder

     Will replacing all four of these hoses cause an issue with the balance of the control valve? I should have included this previously. Thanks for any input.

Kenny 78

Short answer...NO. As long as you are not doing anything that would mechanically move the adjustment screw on the end of the cylinder/valve, you're good to go. 👍

Joel Adams
C3VR Lifetime Member #56    
My Link


(click for Texas-sized view!)             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Awesome!! Thank you.