Caliper rebuild torque specs - Forums - Official C3 Vette Registry

SPONSOR AD

Support our Vendors! | Advertise Here

Topic: Caliper rebuild torque specs

in Forum: C3 Handling Components

Already a Member?
Login
Not yet a Member?
Register for Free!

Caliper rebuild torque specs (1/11)
10/2/13 1:28pm

persico
Standard Member
Send Private Message

Long Valley, NJ - USA

Vette(s):
1972 454 Coupe, 4 speed, Targa Blue with blue interior, luggage rack 2019 Grand Sport Coupe, M7, Ceramic Matrix Gray with gray interior

Joined: 3/21/2007
Posts: 293

For the life of me I can't locate the post from the member whose brakes failed because the caliper halves were not torqued tight enough. I'm sure someone posted the proper torque spec for this on that thread, (Joel?) as it is nowhere to be found in the AIM or Shop Manual. I'm in the middle of the rebuild and need the spec. Anyone? Making progress on my rear end refurbish (the car's not mine!). Thanks.

Mario

/member_uploads/10001_10100/10002/CF39C_rebuilt_rear_spring.JPG

______________

Mario

Quote

Our Sponsors help support C3VR

Re: Caliper rebuild torque specs (2/11)
10/2/13 6:22pm

Adams' Apple

Lifetime Member
Moderator
Send Private Message

Duncanville, TX - USA

Vette(s):
#1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

Joined: 11/8/2003
Posts: 20176

130 ft. lbs on the bolts that hold the two halves of the calipers together. Be sure that the o-rings do not fall out of place, too. Thumbs Up

______________

Joel Adams
C3VR Lifetime Member #56
My Link

(click for Texas-sized view!) NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Quote

Re: Caliper rebuild torque specs (3/11)
10/3/13 7:17am

Thanks Joel!

______________

Mario

Quote

Re: Caliper rebuild torque specs (4/11)
10/3/13 7:40am

PS I noticed it says dip the bolt in brake fluid, I used anti seize on the threads of the caliper half bolts and even on the bleeder screws - did I screw up?

______________

Mario

Quote

Re: Caliper rebuild torque specs (5/11)
10/3/13 8:10am

aceinthehole

Lifetime Member
Send Private Message

Manteca, CA - USA

Vette(s):
1978,two tone,Metalic Rootbeer & gold 1975 L48 4 speed

Joined: 11/20/2005
Posts: 3623

It was I that learned the hard way. You can't go wrong using thread locking compound on the caliper halves, at least I remember how hard it was to get mine apart, but better be sure to use a box wrench to open those bleeders for the first time.

______________

Jimmy B.
Just can't wait to get on the road again.

Click to see larger views!

Quote

Re: Caliper rebuild torque specs (6/11)
10/3/13 9:04am

Aaah yes, but I couldn't find the thread, thanks Jimmy!

______________

Mario

Quote

Re: Caliper rebuild torque specs (7/11)
10/3/13 9:17am

Adams' Apple

persico said: PS I noticed it says dip the bolt in brake fluid, I used anti seize on the threads of the caliper half bolts and even on the bleeder screws - did I screw up?

Naw..yer gud. They just want you to use a lubricant so you can get a accurate torque measurement. In this case, brake fluid as a lubricant is best, because you don't want any other oils possibly mixing with brake fluid....nor do you want the bolts to loosen because of a lubricant. Anti-seize is fine....thread locker might be overkill, but will work, too....and will be a major pita to disassemble next time!! Thumbs Up

______________

Quote

Re: Caliper rebuild torque specs (8/11)
10/3/13 9:36am

whew, thanks! I was worried about the anti seize contaminating the brake fluid so i applied it carefully!

______________

Mario

Quote

Re: Caliper rebuild torque specs (9/11)
2/27/23 4:36pm

Michaldelyria
Former Member
Send Private Message

Keauu, HA - USA

Vette(s):
'81 C3

Joined: 2/17/2022
Posts: 5

I posted on that a little while back so I may be the one you're looking for. The torque value for the bolts that join the calliper halves is 130 ft. pnds.

Quote

Re: Caliper rebuild torque specs (10/11)
2/27/23 4:40pm

Michaldelyria
Former Member
Send Private Message

Keauu, HA - USA

Vette(s):
'81 C3

Joined: 2/17/2022
Posts: 5

OOPs, I'm replying to an old thread and didn't read all the replys.

Quote

Re: Caliper rebuild torque specs (11/11)
2/27/23 6:34pm

Adams' Apple

Michaldelyria said:

OOPs, I'm replying to an old thread and didn't read all the replys.

😅 Welcome to my world! 🤣

______________

Quote

Our Sponsors help support C3VR