Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Cup holder

in Forum: C3 General Discussion


Already a Member?
Login
Not yet a Member?
Register for Free!

Cup holder (1/5)
 2/7/24 11:08am
Tommysvet
Limited Member
Send Private Message

Joined: 10/10/2023
Posts: 2

Hi guys, looking for a good quality cup holder for my C3, found a few that looked cheap, anyone know we’re I can get a quality cup holder

Our Sponsors help support C3VR
Re: Cup holder (2/5)
 2/7/24 11:18am
manchestersharkLifetime Member
Lifetime Member
Send Private Message

Equinunk, PA - USA

Vette(s):
1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.


Joined: 10/31/2007
Posts: 2459

Hi, There are various ones out there. Do you want it to fit over the E Brake handle? Do you usually carry a passenger? There are a couple that are removable. One style has a tab that will slide down between the seat and center console, and has a two cup and change holder. Another style inserts under the lip of the console and rests on the floor. Some are single use or double. Many of the Corvette Parts vendor catalogs carry them. 



______________


Click on image for full view

Re: Cup holder (3/5)
 2/7/24 2:00pm
73shark
Limited Member
Send Private Message

Overland Park, KS - USA

Vette(s):
1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day.


Joined: 7/9/2003
Posts: 896

I always thought the ones that slipped on to the parking brake handle seemed the most user friendly. The downside and the reason I never got them was because I use the parking brake due to being a daily driver in salted road country. I found that if you don't, the cable gets frozen up inside the housing and while you can still apply the parking brake, the spring is not strong enough to break it loose to release it.



______________

1973 L-82 4 spd

Re: Cup holder (4/5)
 2/7/24 4:25pm
manchestersharkLifetime Member
Lifetime Member
Send Private Message

Equinunk, PA - USA

Vette(s):
1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.


Joined: 10/31/2007
Posts: 2459

E Brake ones are always in the way. Tough to shift, and prone to spills. I like to oil my cables for that reason. The center spring is a tad weak, but the ones in the drums are fairly rugged. Try hooking one back up after working on the trailing arms. 



______________


Click on image for full view

Re: Cup holder (5/5)
 2/8/24 2:47am
Kentvetteuk
Limited Member
Send Private Message

, - France

Vette(s):
1978 L48 Auto. Red with Oyster Leather interior. Owned since 1990.


Joined: 8/21/2002
Posts: 128

I like the cup holders that sit in the passenger seat - in my case called "my wife"!😄



______________
Stephen J Irons
Corvette Club France
CCCUK Lifetime Member
Corvettes of Southern California
NCM Family Member
Red Corvettes Have More Fun!
Our Sponsors help support C3VR